Springer basic sets and modular Springer correspondence for classical types

We define the notion of basic set data for finite groups (building on the notion of basic set, but including an order on the irreducible characters as part of the structure), and we prove that the Springer correspondence provides basic set data for Weyl groups. Then we use this to determine explicitly the modular Springer correspondence for classical types (defined over a base field of odd characteristic $p$, and with coefficients in a field of odd characteristic $?\ne p$): the modular case is obtained as a restriction of the ordinary case to a basic set. In order to do so, we compare the order on bipartitions introduced by Dipper and James with the order induced by the Springer correspondence. We provide a quick proof, by sorting characters according to the dimension of the corresponding Springer fibre, an invariant which is directly computable from symbols.     

实时任务动态调度算法

任务调度算法是提高多任务系统效率的一种有效途径,特别是在时间紧迫环境下,实时任务调度算法更具有重要的应用价值.在研究建立实时任务调度模型方法的基础上,对模型进行理论分析,提出了实时任务调度的算法,并通过实例加以验证.     

The Fundamental Experiments of Red Tide Chemical Forecast

Many food algae and red tide algae were cultivated in the f/2 medium, and the nitric oxide (NO) concentration of the medium and the cell density were determined. The experiments on algae were conducted when different concentrations of NO were added into the medium using two methods. The results show that low concentrations of NO were self-produced by marine algae during the exponential growth period and were about nmol/L level. But at the end of the period, i.e., 2 or 3 days before the cell density reaches the maximum, an NO peak appeared, with the NO concentration reaching 10 nmol/L. The NO threshold concentration exists according to the influence of exogenous NO on the marine phytoplankton growth. One type is the threshold concentration that can promote algae growth, and its value is between 10 and 1 nmol level, or even lower. The other type can inhibit the phytoplankton growth, which is about μmol level or higher. The results indicate that red tide algae are far more sensitive to NO than are food algae. The fundamental experimental outcome above may provide a new clue for red tide chemical forecast by inspecting the NO change.     

null

本文对近10年来出现的新型离子液体进行了分类综述,并对其发展前景提出了一些见解.     

柴油烃族组成分布的GC-MS测定

应用GC－MS测定柴油烃族组成按沸点的分布，通过柱色 谱分离后的柴油饱和烃和芳烃组分分别进入气相色谱－质谱联用仪分析，采集其每一扫描的质谱图后，按ASTM－D2425方法计算其每一扫描的烃族组成，因为每一扫描与保留时间对应，所以可将两部分烃族组成加和后应用ASTM－D2887方法计算柴油烃族组成按沸点的分布规律；实验结果表明，该法与ASTM－D2887和ASTM－D2425的实验结果吻合，并能给出有关柴油烃族组成的详尽分布规律。     

Effect of electrolytes on the surface behavior of rhamnolipids R1 and R2

The surface behavior of solutions of the rhamnolipids, R1 and R2, were investigated in the absence and presence of an electrolyte (NaCl) through surface tension measurements and optical microscopy at pH 6.8. The NaCl concentrations studied are 0.05, 0.5 and 1 M. Electrolytes directly affect the carboxylate groups of the rhamnolipids. The solution/air interface has a net negative charge due to the dissociated carboxylate ions at pH 6.8 with strong repulsive electrostatic forces between the rhamnolipid molecules. This negative charge is shielded by the Na⁺ ions in the electrical double layer in the presence of NaCl, causing the formation of a close-packed monolayer, and a decrease in CMC, and surface tension values. The maximum compaction is observed at 0.5 M NaCl concentrations for R1 and R2 monolayers, with the R1 monolayer more compact than R2. The larger spaces left below the hydrophobic tails of R1 with respect to that of R2, due to the missing second rhamnosyl groups are thought to be responsible for the higher compaction. The rigidity of both R1 and R2 monolayers increases with the electrolyte concentration. The rigidity of the R1 monolayer is greater than that of R2 at all NaCl concentrations due to the lower hydrophilic character of R1. The variation of CMC values as a function of NaCl concentration obtained from the surface tension measurements and critical packing parameter (CPP) calculations show that spherical micelles, bilayer and rod like micelles are formed in the rhamnolipid solutions as a function of the NaCl concentration. The results of optical microscopy supported these aggregation states indicating lamellar nematic liquid crystal, cubic lamellar and hexagonal liquid crystal phases in R1 and R2 solutions depending on the NaCl concentration.     

The Role of Acetylcholine in the Cognitive Function of Frontal Neurons in Monkeys

To study the role of acetylcholine(ACh) in the cognitive function of frontal lobes, ACh and atropine were applied iontophoretically to the task-related neurons recorded from an area around the superior ramus of arcuate sulcus in the frontal cortex of 4 rhesus monkeys during the performance of two tasks. The spontaneous discharges and taskrelated responses of most of the neurons which increased their discharge rate in the delay and differentiation periods of the discrimination response go/no-go task and in the cue and delay periods of the delayed discrimination go/no-go task, were further increased during the application of ACh and suppressed during atropine. These results suggest that ACh may be involved in the excitatory process of the activity of the neurons in the above-mentioned area of frontal cortex to play an important role in the cognitive functions of attention, discrimination and short-term memory.     

Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

运用CAFP教学提升学生化学意志素质的教学案例

鉴于当前学生化学意志素质缺乏的问题，探讨以认知、情绪唤醒、情感、意志为主控目标，在预习、尝试学习、交错搭配合作学习中，开展CAFP教学研究，以促成情意因素对认知的调动、动力、强化等功能。     

The Effect of Some Physical Factors on the II → I Phase Transition of Isotactic Polybutene-1

Abstract

Isotactic polybutene-1 exhibits excellent physical, mechanical and chemical properties dependent on its most important polymorphic crystal forms, called forms I, II and III. The most stable form, form I, is generated via a slow, solid-state transformation of the tetragonal, kinetically favored form II. The slow transformation rate of form II to I, accompanied by sample shrinkage, attains its maximum at ca 25?°C and takes 7–10?days, which is a technical problem for iPB-1 practical applications. We describe here the results reported in the literature by the authors and others of the effect of various physical factors that affect the transformation rate, with the goal of determining means of accelerating it; it is noted explanations of the effects are limited and in many cases, not given.